Rebuilding python from scratch again

I got scipy working a week or two ago, but doing so killed matplotib's tkagg. So, I switched to the MacOSX backend, which worked ok until I realized that the interactive (connect) features of macosx failed miserably. This led me to try to get matplotlib working.... which broke with those awful "symbol not found" errors in ft2font.so and _path.so, which I've determined all have to do with linking to the wrong library files.

The most worrisome part of this process was discovering that a full Time Machine recovery of /usr and /Library/Frameworks and /Library/Python did *not* restore python - it stayed dead with IDENTICAL errors. So there are probably additional layers of hidden links.

The process below is based on hyperjeff's blog post but differs substantially based on Sam Skillman's recommendations and the very big issue I ran into that my /usr/local files appeared to be corrupted. After this install, my path no longer includes /usr/local/bin and /sw has been moved to /_sw... hopefully one of these days I'll be ballsy enough to delete it.

1. Install python 2.6.4
   
   1. Needed a clean terminal with no flags set at all. Don't know why - all I had set were a bunch of -arch x86_64 flags.
      
export LD_LIBRARY_PATH="/usr/local/lib:/usr/X11/lib"
./configure --enable-framework=/Library/Frameworks MACOSX_DEPLOYMENT_TARGET=10.6
make -j 17
sudo make install

      
   2. Reset PYTHONPATH to blank
      
   3. alias clearflags='export CFLAGS=""; export CCFLAGS=""; export CXXFLAGS=""; export LDFLAGS=""; export FFLAGS="";' to make sure
      
   
   
2. Install FFTW
   
cd ~/tmp
curl -O http://www.fftw.org/fftw-3.2.2.tar.gz
tar xf fftw-3.2.2.tar.gz
cd fftw-3.2.2
clearflags
./configure CC="gcc -arch x86_64" CXX="g++ -arch x86_64" CPP="gcc -E" CXXCPP="g++ -E"
make -j 17
sudo make install

   
3. Install UMFPACK
   
cd ~/tmp
curl -O http://www.cise.ufl.edu/research/sparse/umfpack/current/UMFPACK.tar.gz
curl -O http://www.cise.ufl.edu/research/sparse/UFconfig/current/UFconfig.tar.gz
curl -O http://www.cise.ufl.edu/research/sparse/amd/current/AMD.tar.gz
tar xf AMD.tar.gz
tar xf UFconfig.tar.gz
tar xf UMFPACK.tar.gz
sed -ibck 's/F77 = f77/F77 = gfortran/' UFconfig/UFconfig.mk
sed -ibck '299,303s/# //' UFconfig/UFconfig.mk
cp UFconfig/UFconfig.h AMD/Include/
cp UFconfig/UFconfig.h UMFPACK/Include/
cd UMFPACK
make -j 17
make hb
make clean

   
4. Install numpy
   
   1. Set environment variables
      
export MACOSX_DEPLOYMENT_TARGET=10.6
export CFLAGS="-arch x86_64"
export FFLAGS="-m64"
export LDFLAGS="-Wall -undefined dynamic_lookup -bundle -arch x86_64"
export PYTHONPATH="/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/"
echo "[amd]
library_dirs = /Users/adam/tmp/AMD/Lib
include_dirs = /Users/adam/tmp/AMD/Include
amd_libs = amd

[umfpack]
library_dirs = /Users/adam/tmp/UMFPACK/Lib
include_dirs = /Users/adam/tmp/UMFPACK/Include
umfpack_libs = umfpack" > site.cfg

      
   2. Setup & Install
      
python setup.py build --fcompiler=gnu95
sudo python setup.py install

      
   3. Test: python -c "import numpy"
      
   
   
5. Install scipy. The important thing is to use g++-4.2 because g++-4.5 doesn't accept the -arch flag. Also, get rid of /sw if it's on your computer at all.
   
sudo mv /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/numpy /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/numpyX
cd ~/repos/scipy-0.7.1
python setup.py clean
rm -rf build
clearflags
FFLAGS="-m64" CFLAGS="-arch x86_64 -I/usr/local/include/freetype2 -I/usr/X11/include -L/usr/X11/lib" LDFLAGS="-Wall -undefined dynamic_lookup -bundle -lpng -arch x86_64" CXX="/usr/bin/g++-4.2" CC="/usr/bin/gcc-4.2" python setup.py build
python setup.py install

   Test the install:
   
python -c "import scipy, scipy.fftpack, scipy.interpolate"

   
6. 1. Install matplotlib. MAKE SURE /usr/bin/texbin is in front of /usr/local/bin and /sw/bin so that dvipng comes from MacTEX. I also ended up having to remove /usr/local/bin from my path completely
      
sudo mv /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/numpy /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/numpyX
cd ~/repos/matplotlib-svn
python setup.py clean
rm -rf build
clearflags

      
   2. Do hyperjeff's recommended edits except don't use /usr/local because it's f'd:
      make.osx:
      
MACOSX_DEPLOYMENT_TARGET=10.6
PREFIX=/usr
PYTHON=/Library/Frameworks/Python.framework/Versions/Current/bin/python

## You shouldn't need to configure past this point (and yet…)

PKG_CONFIG_PATH="${PREFIX}/lib/pkgconfig"
CFLAGS="-arch i386 -arch x86_64 -I${PREFIX}/include -I${PREFIX}/include/freetype2 -isysroot /Developer/SDKs/MacOSX10.6.sdk"
LDFLAGS="-arch i386 -arch x86_64 -L${PREFIX}/lib -syslibroot,/Developer/SDKs/MacOSX10.6.sdk"
FFLAGS="-arch i386 -arch x86_64"

      setup.cfg:
      
wxagg = False

      
   3. Do the install (different from hyperjeff b/c I don't want root)
      sudo make -f make.osx fetch deps
make -f mpl_build mpl_install
python setup.py install

      
   
   
7. Install setuptools
   
8. easy_install ipython
   
9. install everything else pythonically